FBT DJ 15A Active Speaker 15" + 1" 350w + 100w
FBT Audio
FBTDJ15A
J Series
- 2-way bi-amplified system in Bass-Reflex
- Polypropylene enclosure with integrated handle except J 5A/5
- 2 x M10 anchoring points (15A, 12A, DJ 15A), 2 x M6 suspension points (8A, 5A)
- 25mm (1”) HF custom AF compression driver (15A, 12A, 8A, DJ 15A)
- 90°H x 60°V constant directivity horn (15A, 12A, 8A, DJ 15A)
- 380mm (15’’) custom woofer with improved efficiency and linearity
- 25mm (1”) HF custom compression driver
- 90°H x 60°V constant directivity horn
- 2-way bi-amplified system in Bass-Reflex
- 350Wrms class D amplifier for LF and 100Wrms for HF
- High efficiency switch mode power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability
- 4 DSP preset specially designed for DJ users
- Two channels input mixer with stereo/mono OUT
- Input panel with XLR/jack input and XLR Link, Mic/Line switch, Level, HP filter, 4 Preset Switch, Stereo RCA input, level, XLR OUT for dasy-chaining with Stereo/Mono switch selector
- Polypropylene enclosure with integrated handle
- 2 x M10 anchoring points
- 35mm Internal top hat
- Net weight 14kg
- Net dimensions 410x663x387mm (W/H/D)
| Configuration: | 2 Way |
| Built-in amplifier LF/HF: | 350/100w RMS |
| Built-in amplifier peak LF/HF: | 700/200W |
| Frequency response: | 48Hz - 20Khz |
| Low Frequency woofer: | 15" with 2" VC |
| High Frequency driver: | 1" with 1" VC |
| Maximum SPL cont/peak: | 125 / 129dB |
| Dispersion: | 90 x 60 (HxV) |
| Input impedance: | 220 Kohm |
| Crossover Frequency: | 1.8Khz |
| AC Power requirements: | 400VA |
| Input connector: | XLR-Jack Combo with link out |
| Power cord: | 5m IEC |
| Net Dimension (WxHxD): | 310 x 663 x 387mm / 16.14 x 26.10 x 15.23in |
| Net Weight: | 14kg / 30.86lb |
| Transport Dimension (WxHxD): | 495 x 740 x 475mm / 19.48 x 29.13 x 18.70in |
| Transport Weight: | 17.1kg / 37.69lb |
Earn
0
reward points
£0.00
£549.00